Summary:
This product is a kind of gear grease, which is thickened semi synthetic oil with complex soap based thickener and refined with anti oxygen, extreme pressure and other additives.
[performance features]
Excellent extreme pressure, oil film can bear impact load of 2.45 × 105N (25000kgf / cm2), ensuring
At the same time of gear normal lubrication, it can also protect gear normal operation under instantaneous high-strength impact load;
Excellent recoating property and convenient re lubrication;
Long relubrication cycle, repainting every 3-6 months, can ensure the normal operation of the equipment.
[executive standard]
This product conforms to SH / T 0469-94 standard.
[typical data]
Project | Typical data |
appearance | Brown smooth and even cream |
1/4Worked Cone Penetration,0.1mm | 79 |
Drop point，℃ | 218 |
Evaporation（120℃，1h），%(m/m) | 0.68 |
Corrosion (45 copper, 100 ℃, 3H) | qualified |
Adhesion (66 ± 1 ℃, 150 ± 10R / min), adhesion rate,% | 100 |
Pressure oil separation，%(m/m) | 8.11 |
Maximum non seizure load Pb, n | 1176 |
Sintering load Pd, n | >6080 |
[purpose]
This product is suitable for lubrication of various low speed, medium and heavy load gears, sprockets, couplings and other parts. It is suitable for brushing lubrication. -10℃～+120℃。
[precautions]
Before use, please clean the toothed part thoroughly with kerosene or gasoline, and then apply the product after it is dry,
In use, according to the situation, the brush can be applied every 3-6 months or longer;
This product is suitable for the lubrication of gears with linear speed less than 4.5m/s. For higher line speeds,
Observe the lubrication effect.
[packaging]
1 kg / plastic box, 16 kg or according to customer's requirements.