性能特点
1.采用PAO全合成基础油，自由应对极端天气和恶劣车况对发动机的考验，为发动机提供更持久安全保护，让车辆发挥持久动力。
2.出色的低温启动性能和高温润滑性能，适合个地区全天候使用。
3.采用德特的抗摩减磨添加剂，有效减少发动机部件磨损，延长发动机寿命。
4.超凡的高温抗氧化性能和清净分散性能，全面抑制积碳和油污生成，具有超长的换油周期。
技术规格
产品符合以下规格
1.API SN/CF;2.GB11122-2006;3.Q/SH PRD0474-2012
应用范围
适用于采用多气阀、可变气门正时VVT、缸内直喷GDI/FSI/SIDI涡轮增压TSI/TFSI等新技术发动机及长换油期的各种高性能运动轿车。为追求极速驾驶模式和引擎极致保护的人群提供绝佳选择。
典型数据
项目 | 分析结果 |
OW/50 | OW/40 | 试验方法 |
运动粘度（100℃）/mm2/s | 18.42 | 19.20 | GB/T265 |
低温动力粘度（-35℃）/mPa.s | 5860 | 5640 | GB/T6538 |
倾点/℃ | -52 | -52 | GB/T3595 |
闪点（开口）/℃ | 228 | 230 | GB/T3536 |
泡沫性（泡沫倾向性/稳定性） 24℃ml/ml 93.5℃ml/ml 后24℃ml/ml |
|
| GB/T12579 |
0/0 | 0/0 | GB/T12579 |
10/0 | 10/0 | GB/T12579 |
0/0 | 0/0 | GB/T12579 |
密度（20℃）/kg/m3 | 841.4 | 840.4 | ASTMD4052 |
SortsAutomotive lubricants
Introduction:
1. Pao full synthetic base oil is used to freely cope with the test of the engine in extreme weather and severe vehicle conditions, so as to provide more lasting safety protection for the engine and enable the vehicle to play a lasting power。
2. Excellent low-temperature starting performance and high-temperature lubrication performance, suitable for all-weather use in various regions.
3. The use of dete's anti friction and anti-wear additives can effectively reduce the wear of engine components and extend the engine life.
4. Excellent high temperature oxidation resistance and clean dispersion performance, fully inhibit the formation of carbon deposition and oil.
pollution, with an ultra long oil change cycle.
technical specifications
The product meets the following specifications
1.API SN/CF;2.GB11122-2006;3.Q/SH PRD0474-2012
Application scope
It is suitable for all kinds of high performance sports cars with multi valve, variable valve timing VVT, GDI / FSI / Sidi turbocharged TSI / TFSI engine and long oil change period. It is a great choice for people who are looking for extreme driving mode and engine protection.
Typical data
project | Analysis results |
OW/50 | OW/40 | test method |
Kinematic viscosity（100℃）/mm2/s | 18.42 | 19.20 | GB/T265 |
Low temperature dynamic viscosity（-35℃）/mPa.s | 5860 | 5640 | GB/T6538 |
Pour point/℃ | -52 | -52 | GB/T3595 |
Flash point (open)/℃ | 228 | 230 | GB/T3536 |
Foamability (foam tendency / stability) 24℃ml/ml 93.5℃ml/ml after24℃ml/ml |
|
| GB/T12579 |
0/0 | 0/0 | GB/T12579 |
10/0 | 10/0 | GB/T12579 |
0/0 | 0/0 | GB/T12579 |
density（20℃）/kg/m3 | 841.4 | 840.4 | ASTMD4052 |